While all of the parts of your vehicle are important because of their respective roles, one of the most significant would be a car battery. It is going to start your engine and will provide the ignition that is needed for your car to run. When your battery fails, your entire car will be affected.
This, for sure, is the least that you would like to happen while on the road. With this, there is no doubt that proper maintenance of your battery is critical. You should make sure that it is at its best condition, and more importantly, that it is charged.
With this, keep on reading and you will know more about how and where to charge your car battery.
Generally speaking, there are three different ways by which it will be possible to charge your battery. It can be performed in different locations, depending on where you are when the problem is experienced. Regardless of which one you choose, it is important to stay safe at all times.
Battery Charging Using Your Car
This is perhaps one of the simplest solutions by which you can charge your battery. This can be performed while you are on the road. There is no need to stop anywhere once a problem with the battery starts to be apparent.
As long as the engine is running, the battery will keep on charging. The alternator in the vehicle makes it possible for electrical pulses to be created. In return, they allow the storage of power that can be used by the battery.
When the vehicle suddenly stops, the problem may not be with the battery, but this could mean that the alternator has already stopped working. Driving for at least 30 minutes will be good enough to provide you with a decent amount of energy.
While you drive, conserve battery, such as by turning off the radio to make wiser use of whatever charge is left.
Use a Car Battery Charger
This method of charging a car battery can be done at home or at a local auto shop in the presence of a skilled mechanic. Generally speaking, you can do this on your own.
For those who are afraid to do it, however, it would be best to ask for help from a neighborhood mechanic to be sure that it can be completed safely and successfully. Before actually having it charged, you need to have the battery prepared first.
It would be easier if you will remove the battery from the vehicle. Clean the terminals and have it positioned in a preferred place before it is going to be charged. Once it is ready, do the following steps:
- First, have the charger plugged into an outlet. Make sure that your hands are dry and see to it that the outlet is not grounded. This will prevent any risk of electrical shock.
- Take out the clamps and have them attached on the right battery terminals. The red clamp should be attached to the positive terminal, which is marked with “+”. The black clamp, on the other hand, should be attached to the negative terminal, which is marked with “-“. See to it that the clamps will not get in contact with any loose metal.
- Turn on the car battery charger. Choose the voltage that you need. This is not a part wherein you can just guess what voltage to pick. Refer to the instructions from the manufacturer to know the appropriate voltage.
- Observe the battery while it charges. Pay attention to signs of possible problems, such as having leaks or sparks.
- Leave the battery and it will charge on its own, possibly within a night.
- Check how much of the battery has been charged. If it is fully charged, turn the charger off and have it unplugged from the socket.
Jumpstarting Your Battery
Let’s say that you parked your car and you accidentally left your headlights turned on. This is going to consume your battery.
Hence, your car won’t start. In this instance, the best thing that you can do is to jump start your car with the help of the car parked next to you. Make sure that you have more than enough space to be able to perform the procedure safely. Generally speaking, the following are the steps that you should follow:
- Prepare your jumping cable. It is a good idea to always have a jumper cable in the trunk of your car, which will demonstrate preparedness when confronted with an unfortunate situation.
- Make sure that the two cars will be parked nearby each other. Turn off the engine before proceeding with the jump starting.
- Using the cables, attach the red clip on the positive terminal of your car’s battery and the other end on the terminal of the other car.
- Next, attach the black clip on the negative terminal of the other car, the one with a working battery. The other end should end attached on a piece of metal from the car with battery problem. It can usually be a bolt or a nut. Make sure that the wires are not tangled.
- Start the engine of the car without battery problem. Allow the engine to be kept running for a while.
- Now, try to start the disabled car. If the car still does not start, you just have to check the cables for any problem.
- Once your car starts, make sure to allow the engine to run for a while before turning it off. Once everything is done, remove the cables properly.
- Thank the owner of the other car! Do not forget to do this!
It pays to be knowledgeable on how and where to charge your car battery. Even without the help of a mechanic, it is one task that you can complete on your own, as long as you observe safety precautions and follow the instructions that have been mentioned above.
By knowing how to charge your battery, frustrations can be minimal, especially in instances wherein professional help can prove to be scarce.